DEWALT DCX5200 28-Volt Lithium Ion Cordless Hammerdrill/Circular Saw Combo Kit with NANO Technology

Amazon Sales Rank: #123255 in Home ImprovementBrand: DEWALTModel: DCX5200Number of items: 1DC910 28-Volt 1/2-inch hammerdrill/drill/driver with 1/2-inch self-tightening chuck and patented 3-speed all-metal transmissionDC310 28-volt circular saw with 6-1/2-inch carbide tipped blade and rip fence for increased cutting capacity at 45 degree and 90 degreeDEWALT exclusive lithium-ion cells offer long battery life; durability: 2,000 rechargesWeighs 29.6 poundsComes with a 1-hour charger, two 28-volt batteries, a 360-degree side handle, 6-1/2inch carbide tipped blade, and a contractor bag

Complete a wide range of drilling, cutting, and woodworking projects with the DCX5200 from DEWALT. This combination kit includes one DC910 28-volt, 1/2-inch hammerdrill and one DC310 28-volt circular saw. Both tools get their power from a long-lasting 28-volt battery, and provide high-performance results job after job. The DC310 saw features a 6-1/2-inch carbide tipped blade and rip fence for versatility; this tool easily handles traditional cuts and heavy-duty sheeting. Additionally, it delivers smooth angle cuts with its 0-50 degree bevel capacity. Equally efficient, the DC910 boasts a patented three-speed, 100 percent metal transmission for consistency, and a 1/2-inch chuck that tightens itself during work so you don't have to waste time interrupting a project to do it yourself. The DCX5200 comes with a one-hour charger, two 28-volt batteries, a 360-degree side handle, 6-1/2inch carbide tipped blade, and a contractor bag for storage and portability.The DCX5200 Features DC910 Hammerdrill/drill/driver comes equipped with an all new DEWALT built high power, high efficiency motor that delivers maximum performance in all drilling and fastening applications. The DC910 delivers a max power rating of 650 unit watts out (UWO). The DC910 is designed with a patented 3-speed all metal transmission that maximizes the speed applied to each application, offering professional end users optimal performance for various applications. The hammerdrill also features a 1/2 self-tightening chuck, which enables the chuck to automatically tighten throughout operation. The circular saw features a 6 1/2" carbide tipped blade that allows for common cuts of 2x and sheeting material as well as 0-50 degree bevel capacity for angle cuts. The kit includes a 1 Hour Charger, (2) 28 Volt batteries, 360-degree Side Handle, 6 1/2" Carbide Tipped Blade and a Contractor Bag.

Most helpful customer reviews5 of 5 people found the following review helpful.Great kit!By James DI bought this kit for in-wall Telco and network cabling. The drill and circular saw was surprisingly powerful. I had to really tone down the torque settings because I initially screwed a 3 inch screw all the way through a 2x4 without effort. I have only used the circular saw for cutting plywood (for network backboards) but I am sure I could saw through just about anything like a warm knife in butter. The batteries in this 28v kit charge in 1 hour or less, that means by the time you run down the juice in one there is another freshly charged one waiting for you.1 of 2 people found the following review helpful.tool fell apart + Tool King won't honor manufacturer's return policyBy starbrightsteveTwo months ago I bought a 28 volt combo kit. There are three screws behind the chuck on the drill that are backing out and I can't tighten them. The service center can make the repair but then I have no drill for who knows how long. I called Tool King and they will only honor a return policy for 30 days. The Dewalt website lists a 90 day no questions asked return policy. I suspect that anyone that buys dewalt"s 28 or 36 volt hammer drill will eventually have this problem if they use the tool for more than screws.I suggest that the design is weak and I will not buy anything from Tool King from this point on. Dewalt tools may be good for screws but not for heavy duty drilling. I'm an insulation contractor and drill a lot of 2 9/16" holes with a self feed bit. I rarely use the hammer drill function.See all 2 customer reviews...